Friday, July 28, 2017

How to make wet panel carrier widgets

When I travelled to the John Wilson workshop in Katoomba last February, I had to devise a plan for bringing wet paintings home in my luggage.

I made two wet-panel-carrier boxes from plywood, using balsa wood for the divider strips, but I also needed something for paintings that were too small for the boxes.

After fluffing around with various ideas using timber strips and elastic bands – ideas that failed, I might add – I came up with the idea of making small corner spacers that could be held on with clips.

These would work for paintings in a variety of sizes as long as I had a pair of same-size boards to clip together.

I videoed the making of them and have finally edited the footage and uploaded it to Youtube.



While the process looks a little cumbersome in the video, that's largely because I was trying to orient everything for the camera as I worked on just one widget (and also because some of the balsa proved very difficult to cut, even with a sharp knife!)

In reality, it took less than a couple of hours to make 32 of these little spacer widgets – enough to carry 16 small wet paintings. It took me far longer to make the two box carriers.

I would only use these on small paintings, up to around 10"x12".

I haven't tried yet, but it might be worthwhile to make some straight widgets to clip to the centre point of each edge, and this might make them more practical for slightly larger paintings when combined with the corner widgets.

No comments:

Post a Comment